alguien me pued ayudar
Moderators: admin, GTMedia Team
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
alguien me pued ayudar
no tengo la menor idea de como arreglar mi equipo gt media v8x o que sucede ya que lo conecte pero solo me aparece intensidad 90% pero la qualiti o fuerza esta en 0 quizas son los componentes de lnb pero acepta el dvb y no se que hacer, porfavor alguien que me ayude
-
- Posts: 4085
- Joined: Mon Jan 09, 2017 2:31 pm
- Location: West Midlands UK
Re: alguien me pued ayudar
Before your receiver went dark, what satellite was your dish pointing at.
Has your dish moved, check all connections, if you have a spare lnb try that.
Den
Has your dish moved, check all connections, if you have a spare lnb try that.
Den
-
- 网站管理员
- Posts: 2842
- Joined: Sun Dec 06, 2020 8:00 pm
Re: alguien me pued ayudar
La antena se ha movido y no apunta al satélite, o se ha caído del soportechilenoalacalufe wrote: ↑Sun Jun 09, 2024 7:00 pmno tengo la menor idea de como arreglar mi equipo gt media v8x o que sucede ya que lo conecte pero solo me aparece intensidad 90% pero la qualiti o fuerza esta en 0 quizas son los componentes de lnb pero acepta el dvb y no se que hacer, porfavor alguien que me ayude
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
Re: alguien me pued ayudar
aunque lo mueva no aumenta la calidad de la señal esta en 0% apunte donde apunte
-
- 网站管理员
- Posts: 9105
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: alguien me pued ayudar
Check that you still have the correct settings in antenna settings, LNB Frequency, LNB power ON, any DiSEqC switch settings.
Look for where a mouse may have cut the cable?
Unscrew and re screw all the connectors on the cable to the LNB with the power OFF, they can go rusty and stop working.
Owen
Look for where a mouse may have cut the cable?
Unscrew and re screw all the connectors on the cable to the LNB with the power OFF, they can go rusty and stop working.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- 网站管理员
- Posts: 2842
- Joined: Sun Dec 06, 2020 8:00 pm
Re: alguien me pued ayudar
Debes insistir, se hace con paciencia, usa herramientas que te indiquen el azimut y la Altitud correcta, la opción más fácil es que llames a un técnico si no te ves capaz de conseguir Calidadchilenoalacalufe wrote: ↑Sun Jun 09, 2024 9:08 pmaunque lo mueva no aumenta la calidad de la señal esta en 0% apunte donde apunte
-
- Posts: 4085
- Joined: Mon Jan 09, 2017 2:31 pm
- Location: West Midlands UK
Re: alguien me pued ayudar
Before you connected your V8X receiver, were you getting any signal from the receiver that you were using to the TV.
Have you set the V8X correctly, did you scan in any channels from the satellite, what satellite is your dish pointing at.
Den
Have you set the V8X correctly, did you scan in any channels from the satellite, what satellite is your dish pointing at.
Den
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
Re: alguien me pued ayudar
Es la primera vez que lo intento, utilice un buscador de satélite y me di cuenta que la calidad no aumentaba aunque apunte a algún lugar, no sé si el lnb que compre sea el correcto o quizás hice algo mal
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
Re: alguien me pued ayudar
No tengo mucha conocimiento por ello compré un buscador de satélite pero no me busca bien el buscador de satélite, pensé que podría ser el lnb que tenga poca frecuencia
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
Re: alguien me pued ayudar
Y solo me sucede con la calidad, por qué la intensidad está al 90%
-
- Posts: 4085
- Joined: Mon Jan 09, 2017 2:31 pm
- Location: West Midlands UK
Re: alguien me pued ayudar
Let us know what satellite you are pointing at, we will then know what your lnb settings should be.
With more information, users will be able to help you to set up your receiver.
Den
With more information, users will be able to help you to set up your receiver.
Den
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
Re: alguien me pued ayudar
Soy de chile vivo en el centro de chile y supuestamente el satélite fasat- alfa y los satélites de claro, Movistar, Directv
Esos son los satélites supuestamente más cercanos
Esos son los satélites supuestamente más cercanos
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
Re: alguien me pued ayudar
Revise y los más cercanos son el Amazonas y el satélite intelsat
-
- Posts: 4085
- Joined: Mon Jan 09, 2017 2:31 pm
- Location: West Midlands UK
Re: alguien me pued ayudar
Have had a look at (Lyngsat) a couple of satellites 58w/61w are not supported with keys built within the software of the receiver.
Other users may be able to confirm if those channels can be decoded by other means with your receiver.
Sorry i am not much help.
Den
Other users may be able to confirm if those channels can be decoded by other means with your receiver.
Sorry i am not much help.
Den
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
Re: alguien me pued ayudar
Posicioné la antena a la configuración de dishpointer pero de igual forma me aparece ningún programa y en la calidad me aparece 0% yo compré el lnb por Aliexpress y no sé si será bueno :/ dejaré el link por si alguien me puede ayudar a entender mejor ya que quizás sea el lnb pero no estoy muy seguro, (yo tengo el decodificador gt media v8x con el último findware PORFAVOR NECESITO AYUDA
-
- 网站管理员
- Posts: 2842
- Joined: Sun Dec 06, 2020 8:00 pm
Re: alguien me pued ayudar
Tienes que seguir hasta que encuentres Calidad, también tienes que cambiar la altitud, debes hacerlo con paciencia
-
- Posts: 4085
- Joined: Mon Jan 09, 2017 2:31 pm
- Location: West Midlands UK
Re: alguien me pued ayudar
Can you confirm what channels you wish to view from what satellites.
Also have a look at (dishpointer), put the (x) were your dish is, find the satellite required, search, the information will tell you were to point your dish,
what the elevation of your dish should be, skew of your lnb etc.
Den
Also have a look at (dishpointer), put the (x) were your dish is, find the satellite required, search, the information will tell you were to point your dish,
what the elevation of your dish should be, skew of your lnb etc.
Den
-
- 网站管理员
- Posts: 2842
- Joined: Sun Dec 06, 2020 8:00 pm
Re: alguien me pued ayudar
Primero debes saber si en tú país el satélite tiene Huella o Pisada, para usar el tamaño de parabólica y el LNB adecuado
-
- 网站管理员
- Posts: 7260
- Joined: Thu Aug 11, 2016 1:41 pm
Re: alguien me pued ayudar
Hola Debes ser mas especifico. Que satélite (Nombre y localización) estas buscando. Cual es la manera para usar ese satélite??? FTA, llaves Pow3rVu, B1ss o T4ndb3rg, Por lineas 1ks ,newcamd o CCc.m?? Cual es tu ubicación?? Que antena , tamaño y LNB tienes??? De esa manera es mas facil poder ayudarte
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
Re: alguien me pued ayudar
-36.4734785, -72.3282133
Esa es mi ubicación exacta
Esa es mi ubicación exacta
-
- Posts: 10
- Joined: Sun Jun 09, 2024 6:56 pm
Re: alguien me pued ayudar
Tengo una antena banda KU de 60 cm con un lnb de Aliexpress
Este es el enlace del lnb que compre, quizás sea eso, espero que sea así :/
https://a.aliexpress.com/_mqTL3Pm
Este es el enlace del lnb que compre, quizás sea eso, espero que sea así :/
https://a.aliexpress.com/_mqTL3Pm
-
- 网站管理员
- Posts: 9105
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: alguien me pued ayudar
If you know what satellite you are trying to get and have pointed your dish to, manual ADD some TP data or use the data that is already there that matches TP data on sites like lyngsat dot com.
With the TP selected in the TP menu you can then move your dish a little and see if the signal and quality improve.
Yes you will need the correct LNB frequency set in the antenna setting menu too.
From the link that frequency is 9750 / 10600
With dishpointer dot com, you can use a tree or corner of a house in the distance to point your dish,
Owen
With the TP selected in the TP menu you can then move your dish a little and see if the signal and quality improve.
Yes you will need the correct LNB frequency set in the antenna setting menu too.
From the link that frequency is 9750 / 10600
With dishpointer dot com, you can use a tree or corner of a house in the distance to point your dish,
Owen
Last edited by Feralkiwi on Sun Jun 23, 2024 1:36 am, edited 1 time in total.
Reason: typo
Reason: typo
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 9
- Joined: Sat Nov 14, 2020 1:35 am
Re: alguien me pued ayudar
Hola , te puedo ayudar soy de mas al sur de donde vives si quieres me hablas a mi whathsapp +56971214302