Bonjour à tous,
SVP pouvez vous m'aider à résoudre ce problème. J'ai permanament ce message "LNB Short, Please check" sur Mon GT Media v8 finder 2. Et je ne sais pas comment procéder. Pourtant l'appareil n'est pas connecté à un câble ou un l'nb. L'appareil ne peut plus détecter une force de signal.
Merci d'avance.
Excellente soirée
"LNB Short, Please check" message
Moderators: admin, GTMedia Team
-
Feralkiwi
- 网站管理员
- Posts: 9158
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: "LNB Short, Please check" message
Try fully charging the battery.
There may be a fault inside the unit.
Is this a V8 Finder2 grey/black or green?
viewtopic.php?f=71&t=25044
Owen
There may be a fault inside the unit.
Is this a V8 Finder2 grey/black or green?
viewtopic.php?f=71&t=25044
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
CAJE
- 网站管理员
- Posts: 2889
- Joined: Sun Dec 06, 2020 8:00 pm
Re: "LNB Short, Please check" message
Try updating the firmware to rule out a hardware problem.
Could there be a piece of live wire left inside the F connector that makes contact with ground?
Could there be a piece of live wire left inside the F connector that makes contact with ground?