GTMEDIA ATSC3.0 Nextgen TV Converter X1 4K Channel and Broadcast app

[Lining]

1.jpg (74.54 KiB) Viewed 13870 times

2.jpg (149.39 KiB) Viewed 13870 times

4.jpg (95.33 KiB) Viewed 13867 times

3.jpg (44.28 KiB) Viewed 13870 times

Converter X1 (47).png (647.55 KiB) Viewed 11494 times

Converter X1 (50).png (1000.75 KiB) Viewed 11494 times

-----------------------------------------------------------------------------------------------------------------------
Signals and programs
1. You can refer to the following website to check the local antenna and signal.
Just enter your home address to know which antenna you need to receive ATSC3.0 programs.
https://www.antennaweb.org/results
2. You can refer to the following website to check the local program information
https://www.rabbitears.info/market.php?request=atsc3
-----------------------------------------------------------------------------------------------------------------------
Nextgen TV Converter X1
1. After booting up, enter the HD player, and you will be prompted to check the device. You will see the green words Converter X1 device is ready.
2. After opening the channel scan menu, select full channel scan to search, or select manual channel scan to search. You can search for ATSC1.0 and 3.0 programs
3. The program information will show ATSC1.0 or 3.0
4. After connecting to the Internet, you can go to the broadcast application to view the broadcast information
5. You can use DVR to record channels to your USB drive. The same frequency point supports 5 programs to be DVR at the same time
6. Press CUSTOM on the remote control to perform quick DVR and switch audio tracks and subtitles
7. The DVR file path is:
U disk:\Android\data\com.zva3.mobile.litetvandroid\files\hdtvdvr
-----------------------------------------------------------------------------------------------------------------------
ATSC1.0 programs, recorded by DVR are in ts format, which can be played on computers and ordinary players
ATSC3.0 DRM programs: DRM certification requirements, in the definition of receiver products, DRM encrypted content is not allowed to be played on other devices, including computers.
ATSC3.0 free programs: As for free atsc 3.0 content, we will consider whether to develop a transcoding function to achieve playback on computers and ordinary players based on demand
Offline DRM programs: Offline playback mainly relies on the drm license included in the machine firmware
Network DRM programs: Apply for a license online and then play
-----------------------------------------------------------------------------------------------------------------------

[tag875]

I received my GTMedia HDTV Converter X1 here in Orlando Florida USA. I got it set up and completed a channel scan. I received a total of 83 channels OTA. 8 channels of ATSC 3.0. Two of the channels of ATSC 3.0 Nextgen are DRM protected. I can record and play back all channels including ATSC 3.0 DRM protected channels.

I did have an issue when I first set up the box as it would not properly scan the Channels OTA so I contacted a GTMedia engineer and we were able to get a scan completed by powering the unit through the USB 3.0 input of the X1 using a USB cable and power plug.
I will continue to be testing out this unit over the next weekend. The DVR does have a 1 day program guide. I hope the DVR software can be improved over time to provide a 14 day program guide either OTA or through a subscription service like Schedules Directed here in the USA.

[Lining]

I received my GTMedia HDTV Converter X1 here in Orlando Florida USA. I got it set up and completed a channel scan. I received a total of 83 channels OTA. 8 channels of ATSC 3.0. Two of the channels of ATSC 3.0 Nextgen are DRM protected. I can record and play back all channels including ATSC 3.0 DRM protected channels.

I did have an issue when I first set up the box as it would not properly scan the Channels OTA so I contacted a GTMedia engineer and we were able to get a scan completed by powering the unit through the USB 3.0 input of the X1 using a USB cable and power plug.
I will continue to be testing out this unit over the next weekend. The DVR does have a 1 day program guide. I hope the DVR software can be improved over time to provide a 14 day program guide either OTA or through a subscription service like Schedules Directed here in the USA.

You can replace the USB with a 5V 2A power supply, take a look

[tag875]

Yes, after the first time scan of all frequencies using USB 3.0 as a power source, you can then disconnect the USB power and reinstall the 5 volt power transformer and all future scan will work off of the 5 volt power transformer.

[Granmama15]

I don’t have this converter. I like hearing and learning about it though.

[Jackon Kohut]

WNYovertheAir from Miami has also tested this machine. He tested this with 6 encrypted channels and he never connected it to the Internet. But it worked. This device has been burned with a key

[GTmedia-47]

I received my GTMedia HDTV Converter X1 here in Orlando Florida USA. I got it set up and completed a channel scan. I received a total of 83 channels OTA. 8 channels of ATSC 3.0. Two of the channels of ATSC 3.0 Nextgen are DRM protected. I can record and play back all channels including ATSC 3.0 DRM protected channels.

I did have an issue when I first set up the box as it would not properly scan the Channels OTA so I contacted a GTMedia engineer and we were able to get a scan completed by powering the unit through the USB 3.0 input of the X1 using a USB cable and power plug.
I will continue to be testing out this unit over the next weekend. The DVR does have a 1 day program guide. I hope the DVR software can be improved over time to provide a 14 day program guide either OTA or through a subscription service like Schedules Directed here in the USA.

Thank you very much for your test. At present, the EPG and DVR functions of GTMEDIA Converte X1 will be improved with the update of HDTV APP. We have successfully tested it and it is undergoing Google review. It will be available in about a week. You can follow the situation and test it again! Looking forward to your report

[GTmedia-47]

I received my GTMedia HDTV Converter X1 here in Orlando Florida USA. I got it set up and completed a channel scan. I received a total of 83 channels OTA. 8 channels of ATSC 3.0. Two of the channels of ATSC 3.0 Nextgen are DRM protected. I can record and play back all channels including ATSC 3.0 DRM protected channels.

I did have an issue when I first set up the box as it would not properly scan the Channels OTA so I contacted a GTMedia engineer and we were able to get a scan completed by powering the unit through the USB 3.0 input of the X1 using a USB cable and power plug.
I will continue to be testing out this unit over the next weekend. The DVR does have a 1 day program guide. I hope the DVR software can be improved over time to provide a 14 day program guide either OTA or through a subscription service like Schedules Directed here in the USA.

As for the subscription to support the 14-day EPG function, we will launch a user vote later. If most people need this function, we will arrange it in the first project. Thank you for your understanding

[flody1]

Will these work thru an a/v receiver ??? Need something to work thru a/v receiver to Sony projector

[GTmedia-47]

Will these work thru an a/v receiver ??? Need something to work thru a/v receiver to Sony projector

Yes, it can, someone has posted a successful case in the group, here is the link-https://www.facebook.com/share/p/krQGQ6vHhBxLCbuT/

[flody1]

Would be nice if it works like that,,,maybe someone else that has one can try hdmi in to an a/v receiver to see if all tvs /projectors will see atsc3 drm channels????

[flody1]

Would be nice if it works like that,,,maybe someone else that has one can try hdmi in to an a/v receiver to see if all tvs /projectors will see atsc3 drm channels????

Well,, Just Got my GtMedia X1 today. Hooked it up to Ethernet/ Hdmi Out to my Onkyo A/V Reciever and can confirm that it is working on my Sony 4K Tv and my Sony 1080P Projector ceiling mount. 2 DRM channels come in fine . Need to find the way to setup favorites list, but for now have channel list set by numbers ( works for me ). by the way 86 channels scanned in. See how it holds up.

[flody1]

Having trouble on A/V receiver HDMI from X1 . I set the Dispay resolution to 1080p and it will go to 480i if I change HDMI ports to watch something else. Need solid lock on 1080p on the X1. I have tjhe auto resolution off also. Hope for software update maybe.

[wademan]

I just purchase a GTMEDIA Converter X1. When going through the setup and menu of the box. The picture quality is good. It is a little bit slow when changing channels. The DVR could be better like make it where you can do schedule recording like where you can set it to record once, daily, weekly or new. That would be a great feature if you can do a firmware update or programing update to give us that feature. If this can be done that would be great. I will attach a picture of what my other converter box DVR schedule recording looks like as a reference.

[flody1]

Having trouble on A/V receiver HDMI from X1 . I set the Display resolution to 1080p and it will go to 480i if I change HDMI ports to watch something else. Need solid lock on 1080p on the X1. I have the auto resolution off also. Hope for software update maybe.

UPDATE: Yup, the reverting to 480i happens on my Sony 4K Bravia also , Both are thru the A/V receiver,,,please work on software to put a firm lock on the Resolution Setting. Hopefully soon !!!! Thanks

[flody1]

Having trouble on A/V receiver HDMI from X1 . I set the Display resolution to 1080p and it will go to 480i if I change HDMI ports to watch something else. Need solid lock on 1080p on the X1. I have the auto resolution off also. Hope for software update maybe.

UPDATE: Yup, the reverting to 480i happens on my Sony 4K Bravia also , Both are thru the A/V receiver,,,please work on software to put a firm lock on the Resolution Setting. I would also like to see a favorite list to set up.Hopefully soon !!!! Thanks

[tag875]

I have my X1 connected to my Sony Bravia XBR-65x900E using HDMI port 2 or 3 and select in your settings Enhanced Format to display high quality HDMI signals 4k 60 p 4:2:0 10 bit 4:4:4.

You may need to make this adjustment to get full 4k out of the X1. I get full 1080p on my ATSC 3.0 channels and my TV up scales to 4k.

[saylaV]

I did have an issue when I first set up the box as it would not properly scan the Channels OTA so I contacted a GTMedia engineer

How were you able to get in touch with a GTMedia engineer? I'm having issues with my Converter X1 and I think I need to get in touch with one of the GTMedia engineers before I return the unit.

[tag875]

I replied to your post on your tuning issue. Sounds similar to my initial issue that I corrected.

You can email Lynn Huang at support@gtmedia.cc

Tom

[flody1]

I have my X1 connected to my Sony Bravia XBR-65x900E using HDMI port 2 or 3 and select in your settings Enhanced Format to display high quality HDMI signals 4k 60 p 4:2:0 10 bit 4:4:4.

You may need to make this adjustment to get full 4k out of the X1. I get full 1080p on my ATSC 3.0 channels and my TV up scales to 4k.

I decided to change the HDMI port on A/V ,,,I was using and it look to be working now. For whatever reason I was using the last port marked "CD" that may have been the issue. I'll check the Sony projector later when I use it. !!!!!!

[tag875]

Most TVs only have one or two HDMI ports that can support 4k for a Blue Ray player or in your case a 4k streaming box. Within the Sony Android System you can adjust the HDMI port for enhanced 4k or standard 1k max.

[flody1]

Thanks, my Onkyo A/V Receiver has HDMI 7 in/ 2 out. I know if your tv is 4k and Projector is 1080p ,then the A/v receiver will go with the lowest setting of 1080P.

[Elin]

Hopefully soon !