GT MEDIA V8 UHD 4K ULTRA HD HEVC H.265

[Naslund019]

I have a problem with this receiver, before it started working sometimes, although before the boot was lit on the receiver display, and now it can't be started, the boot is still lit, I don't understand why this problem occurred and how to solve it, thanks in advance for the answers

[CAJE]

You can try using a different power supply; if you only follow the pilot light, you'll need to use a programmer clip to recover it.

[Naslund019]

please advise what exactly to use a more powerful power supply, now there is this MODEL: A-18-12
INPUT: 100-240VAC,50/60Hz,0.5A
OUTPUT: 12V---1.5A
and if the power supply you recommend here in the message does not help, then send me a programmer clip that I should try, thank you in advance

[Feralkiwi]

CAJE means that you try another power supply if you have one.
It needs to be 12V 1.5A, or 2A.

If changing power supply makes no difference, then recovery methods can be tried.
V8UHD_How to USB forced upgrade 2020.11.4.zip

Owen

[Naslund019]

so I'm writing a little late but the upgrade via usb didn't help at all and the inscription on the display didn't move at all, the same thing still lights up, I tried all the options, overwriting the M.rs firmware to flash.bin. then update.bin even without overwriting the firmware, the M.rs firmware is there, I just don't know what version it is, there is an active ApolloPro.IM.151 subscription and even the adapters didn't help, I tried 1.5 V and 2.0 V for Linux receivers in the middle with such a brick, advise what to do next, I also have a laptop at my disposal, not a desktop computer

[CAJE]

You must use the latest IKS firmware renamed to update.bin