Problem scan unicable

[paolopa]

hi I purchased a V8 Finder Meter to check the pointing of my dish.
I have a unicable LNB set on my VU+ like this:
LOF Unicable / scr
Humax manufacturer
Type 150 SCR
SCR1 CHANNEL
FREQUENCY 1210

Now on the V8 I set the channel search on the Hot Bird 13 ° E satellite
LNB FREQUENCY imposed
Unicable 10200
FREQUENCY CONTROL 1210
CHANNEL IF 1
PSIZIONE S A

I do a search but I can't find anything.

How should I set it up?

salve ho acquistato un V8 Finder Meter per controllare il puntamento della mia parabola.
Io ho un LNB unicable impostato sul mio VU+ così:
LOF Unicable/scr
Costruttore Humax
Tipo 150 SCR
CANALE SCR1
FREQUENZA 1210

Ora sul V8 imposto la ricerca dei canali sul satellite Hot Bird 13°E
LNB FREQUENZA imposto
Unicable 10200
CONTROLLO FREQUENZA 1210
CANALE IF 1
PSIZIONE S A

Effettuo una ricerca ma non trovo nulla.

Come devo impostare il tutto?

[Feralkiwi]

There are options for 1 to 8 for the IF channel.
Why did you choose "1" ?
There is also unicable 9750/10600. I would expect that to be more the normal LNB frequency.

Owen

[paolopa]

my writing error I chose unicable 9750/10600 and then I tried all the others too but I only tune in 30 channels and no more.

mio errore di scrittura ho scelto proprio unicable 9750/10600 e poi ho provato tutti gli altri anche ma non faccio che sintonizzare 30 canali e non di più.

[Feralkiwi]

Maybe with unicable you have to enter all the TP info and do a "Auto"scan to get the channels.
Unicable send instructions to the LNB as to what frequency to tune to and send back.
Maybe blind scan does not send this info

Owen