intelsat 34 and intelsat 21

[sathunter]

Is intelsat 21 3760 27690 , intelsat 34 4018v 30,000,3925v 30,000 are these available

[cpr43]

Is intelsat 21 3760 27690 , intelsat 34 4018v 30,000,3925v 30,000 are these available

They all working fine

[lme]

What about tp. 3720V ?
it's all snowy....

[sathunter]

The 3720v is snowy must be analog?

[lme]

The 3720v is snowy must be analog?

Nope. rescanned tp & is still PV.

[cpr43]

The 3720v is snowy must be analog?

Nope. rescanned tp & is still PV.

I move my actuator to reach 135w and lost 55W. Lower I can go is 58W. Do you still have problem with any TP at 58W?

[sathunter]

THE 55.5 satellite for 3760v 27690 your dish is not going lower then 58 deg is it stuck maybe actuator slipped or dish turned on pole limit switch software limit hardware limit did you check those?

[cpr43]

I sent you a PM

[sathunter]

I looked at my post here and noticed i put 55.5 deg instead of 58 deg 58 deg 3760v 27690, 3720v, 30000,4040h is what im having issue's with.

[cpr43]

I looked at my post here and noticed i put 55.5 deg instead of 58 deg 58 deg 3760v 27690, 3720v, 30000,4040h is what im having issue's with.

I just checked and all 3 TPs (58w) are working fine, using old keys!

[lme]

I looked at my post here and noticed i put 55.5 deg instead of 58 deg 58 deg 3760v 27690, 3720v, 30000,4040h is what im having issue's with.

I just checked and all 3 TPs (58w) are working fine, using old keys!

Do you have a clear/steady pic on 58w/3720v ?
using same old emm keys, I get just a snowy/fuzzy pic & sound on this tp !
I'm suspecting that 5G from a nearby tower may be the cause, but no problem on 3760v.
the 2 tps have different SR also....

[cpr43]

I looked at my post here and noticed i put 55.5 deg instead of 58 deg 58 deg 3760v 27690, 3720v, 30000,4040h is what im having issue's with.

I just checked and all 3 TPs (58w) are working fine, using old keys!

Do you have a clear/steady pic on 58w/3720v ?
using same old emm keys, I get just a snowy/fuzzy pic & sound on this tp !
I'm suspecting that 5G from a nearby tower may be the cause, but no problem on 3760v.
the 2 tps have different SR also....

Strong and clear

[sathunter]

I still don's understand how your getting a snowy picture on 3720 i guess your seeing a pixilated picture is your signal going up and down that's a sign of 5g interference or some other interference. You could try late at night to see if it comes in or different times during the day and night.

[lme]

I still don's understand how your getting a snowy picture on 3720 i guess your seeing a pixilated picture is your signal going up and down that's a sign of 5g interference or some other interference. You could try late at night to see if it comes in or different times during the day and night.

as i said, i suspect the 5G tower, but no problems with 3760v !!!
did check the signal @ diff times of the day: same story...

[lme]

This is what the pic looks like on 2 diff. boxes:

3720V.jpg

[cpr43]

This is what the pic looks like on 2 diff. boxes:
3720V.jpg

That's not GTMedia. Enigma2 tuners tend to be poor pulling weak signals. Any GTMedia with similar? Can you post pics??

[lme]

This is what the pic looks like on 2 diff. boxes:
3720V.jpg

That's not GTMedia. Enigma2 tuners tend to be poor pulling weak signals. Any GTMedia with similar? Can you post pics??

No gtm box in use. my v7max has a poor tunner & does not roll keys. no HEVC compatibility.
The hole situation started about ~2 months ago.
I disagree with E2 boxes about weak signals !!. I'm using the latest xxxxxxxxx

[cpr43]

This is what the pic looks like on 2 diff. boxes:
3720V.jpg

That's not GTMedia. Enigma2 tuners tend to be poor pulling weak signals. Any GTMedia with similar? Can you post pics??

No gtm box in use. my v7max has a poor tunner & does not roll keys. no HEVC compatibility.
The hole situation started about ~2 months ago.
I disagree with E2 boxes about weak signals !!. I'm using the latest xxxxxxxxx

In that case you should be looking for directions on those models E2 forums. Inputs from GTMedia users won't help at all.

FORUM RULES.