Hello, I have a problem with the gtmedia v8 decoder, no image on the hdmi socket disappeared first I used the euro socket now and it went out. The decoder works "normally", you can turn it on, switch channels, but there is no picture. After disassembly, apart from discoloration, everything is ok.
Anyone got an idea.
Thank you in advance
Gtmedia v8 no image
Moderators: admin, GTMedia Team
-
jazi@o2.pl
- Posts: 1
- Joined: Mon Jun 26, 2023 4:55 pm
Gtmedia v8 no image
You do not have the required permissions to view the files attached to this post.
-
Feralkiwi
- 网站管理员
- Posts: 9110
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: Gtmedia v8 no image
The surface mount connections on the HDMi connector may be loose.
There can be a lot of mechanical force applied by the HDMi cable that can bend the connector off the circuit board.
I have had this with USB connections
As you now have it working, be careful not to twist or bend the HDMi cable connection, as that may open circuit one of the solder surface mount connections again.
If you have a very flexible HDMi cable, best use that so force is not so great.
Owen
There can be a lot of mechanical force applied by the HDMi cable that can bend the connector off the circuit board.
I have had this with USB connections
As you now have it working, be careful not to twist or bend the HDMi cable connection, as that may open circuit one of the solder surface mount connections again.
If you have a very flexible HDMi cable, best use that so force is not so great.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.