v8 Finder pro

V8 FINDER PRO2 /V8 FINDER2 / BT03 /BT05

Moderators: admin, GTMedia Team

klamot98
Posts: 17
Joined: Sun Jul 17, 2022 11:15 am

v8 Finder pro

Post by klamot98 »

telewizor odbiera programy tv naziemnej a na moim mierniku v8 Finder pro pokazuje 0 sygnału. użytkownicy piszą na forum że na v8 Finder pro 2 jest to samo te same błędy na obu miernikach o co chodzi.Mierniki Zabawki :lol:

User avatar
CAJE
网站管理员
Posts: 2899
Joined: Sun Dec 06, 2020 8:00 pm

Re: v8 Finder pro

Post by CAJE »

The problems that many have is because they do not have enough signal in reception 47-77dBμV and an MER greater than 22dB
If you have no power, it will be because you have not connected it to the correct connector.
Squeezing the F connector with a tool may cause internal breakage

klamot98
Posts: 17
Joined: Sun Jul 17, 2022 11:15 am

Re: v8 Finder pro

Post by klamot98 »

Sygnał anteny jest dobry tylko słaba czułość miernika :mrgreen: szybciej można ustawić antenę bez miernika.
You do not have the required permissions to view the files attached to this post.

User avatar
CAJE
网站管理员
Posts: 2899
Joined: Sun Dec 06, 2020 8:00 pm

Re: v8 Finder pro

Post by CAJE »

klamot98 wrote:
Tue Aug 06, 2024 12:29 pm
Sygnał anteny jest dobry tylko słaba czułość miernika :mrgreen: szybciej można ustawić antenę bez miernika.
It is a signal meter, put the main screen to know where you have the problem

klamot98
Posts: 17
Joined: Sun Jul 17, 2022 11:15 am

Re: v8 Finder pro

Post by klamot98 »

2 fotka tv odbiera a na mierniku słabo :o
You do not have the required permissions to view the files attached to this post.

User avatar
CAJE
网站管理员
Posts: 2899
Joined: Sun Dec 06, 2020 8:00 pm

Re: v8 Finder pro

Post by CAJE »

You have noise, the television the cable will act as an antenna
Check connections, the MER must be greater than 23dB and the C/N at 28dB, you must get the MER and C/N values as high as possible
You do not have the required permissions to view the files attached to this post.

klamot98
Posts: 17
Joined: Sun Jul 17, 2022 11:15 am

Re: v8 Finder pro

Post by klamot98 »

tv odbiera 100% a miernik v8 pro pokazuje jakieś anomalie to moim zdaniem miernik żle działa powinien wykryć słaby sygnał. :?

User avatar
CAJE
网站管理员
Posts: 2899
Joined: Sun Dec 06, 2020 8:00 pm

Re: v8 Finder pro

Post by CAJE »

Look for the problem because you don't have a sign for it to be considered a sign.
With a fork I make a television work, possibly the television wiring acts as an antenna, and if you put it in the finder it is not able to detect it
Check the antenna, if it is active, put power on it and if you have an amplifier, change it.

salah
Posts: 84
Joined: Fri Dec 28, 2018 11:03 pm
Location: Error

Re: v8 Finder pro

Post by salah »

CAJE wrote:
Tue Aug 06, 2024 5:23 pm
Look for the problem because you don't have a sign for it to be considered a sign.
With a fork I make a television work, possibly the television wiring acts as an antenna, and if you put it in the finder it is not able to detect it
Check the antenna, if it is active, put power on it and if you have an amplifier, change it.
Hey Why don't you tell him that this version GT media V8 pro is full of bugs that cannot be fixed? 😏
¯\_(ツ)_/¯...

User avatar
CAJE
网站管理员
Posts: 2899
Joined: Sun Dec 06, 2020 8:00 pm

Re: v8 Finder pro

Post by CAJE »

salah wrote:
Thu Aug 15, 2024 2:52 am
CAJE wrote:
Tue Aug 06, 2024 5:23 pm
Look for the problem because you don't have a sign for it to be considered a sign.
With a fork I make a television work, possibly the television wiring acts as an antenna, and if you put it in the finder it is not able to detect it
Check the antenna, if it is active, put power on it and if you have an amplifier, change it.
Hey Why don't you tell him that this version GT media V8 pro is full of bugs that cannot be fixed? 😏
Because you still haven't shown any errors, the problem you have is yours

klamot98
Posts: 17
Joined: Sun Jul 17, 2022 11:15 am

Re: v8 Finder pro

Post by klamot98 »

A co wam trzeba 100 razy pokazywać błędy żebyście zrozumieli że urządzenie jest wadliwe i odwlekacie w czasie żeby nic nie robić.

Hazl
Posts: 52
Joined: Fri Jan 20, 2023 5:03 pm

Re: v8 Finder pro

Post by Hazl »

CAJE wrote:
Thu Aug 15, 2024 5:43 am
salah wrote:
Thu Aug 15, 2024 2:52 am
CAJE wrote:
Tue Aug 06, 2024 5:23 pm
Look for the problem because you don't have a sign for it to be considered a sign.
With a fork I make a television work, possibly the television wiring acts as an antenna, and if you put it in the finder it is not able to detect it
Check the antenna, if it is active, put power on it and if you have an amplifier, change it.
Hey Why don't you tell him that this version GT media V8 pro is full of bugs that cannot be fixed? 😏
Because you still haven't shown any errors, the problem you have is yours
Please stop writing nonsense. I wrote about it 18 months ago. The device xxxxxxx and so xxxxxxxx I just wrote as much evidence here with pictures. I'm not the only one.

klamot98
Posts: 17
Joined: Sun Jul 17, 2022 11:15 am

Re: v8 Finder pro

Post by klamot98 »

Witam specjalnie dla ciebie kupię nową antenę i zrobię test: i dam znać jakie wyniki. :P

User avatar
CAJE
网站管理员
Posts: 2899
Joined: Sun Dec 06, 2020 8:00 pm

Re: v8 Finder pro

Post by CAJE »

klamot98 wrote:
Sat Aug 24, 2024 10:59 pm
Witam specjalnie dla ciebie kupię nową antenę i zrobię test: i dam znać jakie wyniki. :P
It would be convenient to know the technical characteristics of the antenna you want to buy.

It would be advisable to change the coaxial cable to ensure optimal operation of the new equipment.

User avatar
CAJE
网站管理员
Posts: 2899
Joined: Sun Dec 06, 2020 8:00 pm

Re: v8 Finder pro

Post by CAJE »

klamot98 wrote:
Sat Aug 24, 2024 10:59 pm
Witam specjalnie dla ciebie kupię nową antenę i zrobię test: i dam znać jakie wyniki. :P
Here you have more information