GT media V8 finder pro released ?

[salah]

Hello guys, I found this GT media V8 pro product on Ali Express. Is it official from GT media? And what do you think of it?

[josete2021]

Hola,en la sección de nuevos lanzamientos no aparece.

viewforum.php?f=58



Pero luego en aliexpress si aparece.

https://es.aliexpress.com/wholesale?cat ... finder+pro


Que extraño!

[Feralkiwi]

Nothing on GT Medias www.freesat.cc or their Aliexpress store.

Owen

[salah]

Strange and no one knows?

€ 113,18 50%OFF | NEW GTMEDIA V8 Finder Pro satellite signal finder Auto Calculate Angle of AZ,EL Supports Youtube for USB wifi 2.4G
https://a.aliexpress.com/_mOOEWW7

[kladovchk]

GTMEDIA V8 Finder Pro

Стандарты передачи: DVB-S2X/S2/S,DVB-T2/T,DVB-C/ATSC-C,MPEG-2,MPEG-4,H.264/H.265(10 бит)
Поддержка softcam: BISS auto roll, PowerVu auto roll, TNT(19.2E)
Поддержка VCM, ACM, multi-stream, T2MI, Multi-PLP
Поддержка IKS: CCc.m, NEWCAM, MGCAM

https://aliexpress.ru/item/100500254529 ... 2e0exx90YR

Does this correspond to what is written?
Or there will be 2 software like on GTMedia_X8COMBO and GTMedia_X8?
PS I wrote to the seller to the seller on the "Global Android TV Box Store" according to the characteristics of "GTMEDIA V8 Finder Pro". Waiting for an answer. Sales will begin after September 25.

[Feralkiwi]

Product is now up on GT Media's web site.
https://www.freesat.cc/collections/sate ... inders-409

Owen

[Blank]

Product is now up on GT Media's web site.
https://www.freesat.cc/collections/sate ... inders-409

Owen

Super Owen, will we have some units to field test this new Finder, since it's official now?

[iamjohnowusu]

Please is GT MEDIA V8 PRO FINDER 4K?

[kladovchk]

Please is GT MEDIA V8 PRO FINDER 4K?

Eutelsat Hot Bird 13
10727 H 30000 3/4 DVB-S2/8PSK HEVC
Canal Nasa TV HD image non, seulement le son.

[Joaquimoliveira]

O que está faltando no aparelho é uma bolça suporte para transportar o aparelho , para utilizar ... os outros satfinder da marca sempre tiveram esta bolsa de transporte.

[John1]

hello,

Need clarification for signal 85% equal 11.85db wile 76% is almost equal 12.35db.

[Tom.w]

hello,

Need clarification for signal 85% equal 11.85db wile 76% is almost equal 12.35db.

we will change the signal number following the db number.

[Tom.w]

Nasa TV UHD seems 4k channel, the finder pro can not support 4k decoder.
about the bag, I will communicate with my colleagues.

[Mauro18]

Amigos compre mi satfinder v8 pro. Consulta, como puedo cambiar el modo Dvb-S a Dvb-S2x en el menú de satélite?.
Otra consulta como puedo cambiar el modo Dvb-T a DVB-T2 en el menú señal terrestre?.
Gracias por sus comentarios

[cpr43]

Amigos compre mi satfinder v8 pro. Consulta, como puedo cambiar el modo Dvb-S a Dvb-S2x en el menú de satélite?.
Otra consulta como puedo cambiar el modo Dvb-T a DVB-T2 en el menú señal terrestre?.
Gracias por sus comentarios

El tuner cubre ambas opciones. No hay necesidad de cambiarlo

[Mauro18]

Gracias amigo. Soy de Chile, consulta, conecté la antena pero no baja ningún canal en señal digital terrestre. Probe la antena con otro sintonizador norma isdb-t y baja los canales.
Por último para que es la tecla DVB?

[Feralkiwi]

The DVB key is to return after you have pressed the AV key to view an external AV signal.

Try different countries for the DVB-T until you find one that has the same frequency / 7MHz 6MHz 8MHz etc that you need.

Owen

[Mauro18]

Gracias amigo, probé la señal terrestre norma DVB-T con la frecuencia correcta, pero no escanea ningún canal en Chile.
Consulta, si hago factory setting se borra toda la información de los satélites y los datos del equipo o se borran solamente los canales?

[Feralkiwi]

A reset will clear the channels and you will be left with the factory satellite list.

Have you tried using the manual scan fro your local DVB-T. Set the frequency and sr that you need.

Also if you have a amplifier in your antenna cable, you will need to turn on the antenna power for the DVB-T.

Owen

[Tom.w]

Gracias amigo. Soy de Chile, consulta, conecté la antena pero no baja ningún canal en señal digital terrestre. Probe la antena con otro sintonizador norma isdb-t y baja los canales.
Por último para que es la tecla DVB?

hola tu señal digital terrestre es isdbt-t, ¿sí o no?
si es isdbt-t, el v8finder pro no puede admitir esta señal.
hello your digital terrestrial signal is isdbt-t, yes or no?
if isdbt-t, the v8finder pro can not support this signal.

[Mauro18]

Satfinder V8 Pro, recién probado y no soporta diseqc 1.1.Una lastima.

[Feralkiwi]

Satfinder V8 Pro, recién probado y no soporta diseqc 1.1.Una lastima.

I found that the unit has issues when on a Horizontal TP.
The DiSEqC commands are there. Try switching when on a V TP.
I think the issue is the same as was with the early Finder V71, the switch mode power supply is switching at 22kHz while on a H TP (18 volts).
I have reported this but had no reply so far.

It may also be due the the DiSEqC commands being sent 1.0 first and 1.1 second.
This means that if you start a scan it will only send the commands once and that means the 1.0 command is not sent after the 1.1 as you get while on a channel and the commands are resent.
I go to the list and wait on the satellite I want to scan until it shows a signal level on a known good TP.
I need to do this with my GT Combo as well.
I have also reported this problem.

If you have a tone type finder to place in the LNB cable, you can use that to see if the 22kHz tone is in effect "ON".

Owen

[Lining]

Satfinder V8 Pro, recién probado y no soporta diseqc 1.1.Una lastima.

I found that the unit has issues when on a Horizontal TP.
The DiSEqC commands are there. Try switching when on a V TP.
I think the issue is the same as was with the early Finder V71, the switch mode power supply is switching at 22kHz while on a H TP (18 volts).
I have reported this but had no reply so far.

It may also be due the the DiSEqC commands being sent 1.0 first and 1.1 second.
This means that if you start a scan it will only send the commands once and that means the 1.0 command is not sent after the 1.1 as you get while on a channel and the commands are resent.
I go to the list and wait on the satellite I want to scan until it shows a signal level on a known good TP.
I need to do this with my GT Combo as well.
I have also reported this problem.

If you have a tone type finder to place in the LNB cable, you can use that to see if the 22kHz tone is in effect "ON".

Owen

Thank you, we have checked and fixed your feedback

[Roberto21_M80]

Is dCSS compatible???

[Feralkiwi]

Is dCSS compatible???

This looks like the next version up of the old Unicable LNB's.
Tom.w answered your other post yesterday as yes the unicable option should work.

This from this site.

Code: Select all

https://www.mtigroup.com/upfiles/e_pro_tb01472712600.pdf

The dCSS LNB is backward compatible with EN50494 standard.
Moreover, MTI DCSS LNB is also fully compliant with new EN50607
standards and able to support mixed EN50494/EN50607 installation
of next generation PVRs, HMGs(Home Media Gateway) and compat-
ible STB.

Standard EN50494 looks to be the old unicable as per this site.

Code: Select all

https://www.inverto.tv/what-is-unicable-2?locale=en

Have a read of these sites, it may help.

Buying one to test with is a bit expensive. US $252.49 on Aliexpress and only 4 left.

Code: Select all

https://www.aliexpress.com/item/1005002181542653.html

Owen