Softcam emu keys

[Uacitty70]

Hello at everybody!!!!
What is the fastest way to upload a softcam.key??? Whatever it be that's good so long as there is the file bin right or Am I wrong?

[iq180]

Hello at everybody!!!!
What is the fastest way to upload a softcam.key??? Whatever it be that's good so long as there is the file bin right or Am I wrong?

What receiver do you have, most keys for freesat receivers are in the software updates so there is no need to add keys.

[Uacitty70]

I got gt media V7 pro multistream

[STRETCH]

What channels do you wish to decode, from what satellite/s.

Den

[Uacitty70]

ESPN 1 e 2 on 15 west...at the moment are black with the last firmware.

[STRETCH]

@uacitty70
PM sent

Den

[chrisand21]

where can i find the latest sofcam keys for europe-asia please?

[STRETCH]

What channels / satellites do you require keys for.
Most keys are built within the software, make sure you are connected to the internet for the receiver to fine the Biss keys, Powervu should auto roll when the keys change unless they are (biss 2) or (powervu +).

Den

[luiz felipe]

BOA NOITE AMIGO ESTOU PRECISANDO DAS EMM KEY DO GTMEDIA PRA FAZER O AUTOROOM NAS CHAVES DO GOL TV HD QUE FICA NO SATELITE SES 6 O QUE VOCE PODE PRA NOS AJUDAR FICAREI GRATO OK.

[luiz felipe]

HELLO FRIEND THE GTMEDIA RECEIVER IS MISSING THE AUTOROOM KEYS OF THE GOL TV HD CHANNELS that are on the satellite ses 6 band c gtmedia v8 uhd is not locating these keys but the EMM KEY PRO SAME MAKE THE AUTO ROOM SEE WHAT YOU COULD DO TO HELP US OK HUG.


freguencia 4060 R 30000 gol tv e vtv ok.

[cpr43]

HELLO FRIEND THE GTMEDIA RECEIVER IS MISSING THE AUTOROOM KEYS OF THE GOL TV HD CHANNELS that are on the satellite ses 6 band c gtmedia v8 uhd is not locating these keys but the EMM KEY PRO SAME MAKE THE AUTO ROOM SEE WHAT YOU COULD DO TO HELP US OK HUG.


freguencia 4060 R 30000 gol tv e vtv ok.

Hola luiz felipe y Bienvenido

Por favor lee aquí las reglas del foro:

viewtopic.php?f=47&t=16325
La regla#8 NO permite el uso de letras mayúsculas pues se entiende que usted esta gritandoooo.

Con relación a el mux de GolTV hemos estado siguiendo la información sobre un modelo árabe que si hace Autoroll y consigue las llaves ECM 00 y 01 para poder abrir los canales. Tenemos la marca pero NO el modelo. Lamentablemente nosotros hemos estado analizando el stream y NO hemos podido conseguir las llaves EMM de autoroll. Deben haber conseguido las llave maestra EMM de algún otro modo. Pueden tratar de pedirle a esta persona que les envie la EMM o copia de su Softcam?? Mientras tanto nosotros seguimos intentando.

[sansin]

Hi Guys,
Need help with softcam key for Intelsat 19 166E. I am using xxxxx as my receiver.
Kind Regards

[regiardo]

HELLO FRIEND THE GTMEDIA RECEIVER IS MISSING THE AUTOROOM KEYS OF THE GOL TV HD CHANNELS that are on the satellite ses 6 band c gtmedia v8 uhd is not locating these keys but the EMM KEY PRO SAME MAKE THE AUTO ROOM SEE WHAT YOU COULD DO TO HELP US OK HUG.


freguencia 4060 R 30000 gol tv e vtv ok.

Hola luiz felipe y Bienvenido

Por favor lee aquí las reglas del foro:

viewtopic.php?f=47&t=16325
La regla#8 NO permite el uso de letras mayúsculas pues se entiende que usted esta gritandoooo.

Con relación a el mux de GolTV hemos estado siguiendo la información sobre un modelo árabe que si hace Autoroll y consigue las llaves ECM 00 y 01 para poder abrir los canales. Tenemos la marca pero NO el modelo. Lamentablemente nosotros hemos estado analizando el stream y NO hemos podido conseguir las llaves EMM de autoroll. Deben haber conseguido las llave maestra EMM de algún otro modo. Pueden tratar de pedirle a esta persona que les envie la EMM o copia de su Softcam?? Mientras tanto nosotros seguimos intentando.

cpr43 saludos, intente mandarle algo por privado pero no me permite subir un archivo....respecto a este tema..

[cpr43]

HELLO FRIEND THE GTMEDIA RECEIVER IS MISSING THE AUTOROOM KEYS OF THE GOL TV HD CHANNELS that are on the satellite ses 6 band c gtmedia v8 uhd is not locating these keys but the EMM KEY PRO SAME MAKE THE AUTO ROOM SEE WHAT YOU COULD DO TO HELP US OK HUG.


freguencia 4060 R 30000 gol tv e vtv ok.

Hola luiz felipe y Bienvenido

Por favor lee aquí las reglas del foro:

viewtopic.php?f=47&t=16325
La regla#8 NO permite el uso de letras mayúsculas pues se entiende que usted esta gritandoooo.

Con relación a el mux de GolTV hemos estado siguiendo la información sobre un modelo árabe que si hace Autoroll y consigue las llaves ECM 00 y 01 para poder abrir los canales. Tenemos la marca pero NO el modelo. Lamentablemente nosotros hemos estado analizando el stream y NO hemos podido conseguir las llaves EMM de autoroll. Deben haber conseguido las llave maestra EMM de algún otro modo. Pueden tratar de pedirle a esta persona que les envie la EMM o copia de su Softcam?? Mientras tanto nosotros seguimos intentando.

cpr43 saludos, intente mandarle algo por privado pero no me permite subir un archivo....respecto a este tema..

Te envio mi email por privado

[Feralkiwi]

Hi Guys,
Need help with softcam key for Intelsat 19 166E. I am using xxxxxx as my receiver.
Kind Regards

This site is for GT Media models.

The new BBC TP 4060 H 30000 on intelsat19@166e does open, but the GT Media GT Combo I have gets mixed up with the tag for the old TP data when trying to open the new TP.
Write down the codes for your old BBC channels and then delete them and then add the same code in for the new 4060 TP BBC channel.
With GT Media units the codes are in the software so they auto roll, but this is a problem for GT Media units too as there are two BBC channels with the same SID Vpid etc, but with different TP frequency data.

Owen

[cccam2012]

HELLO FRIEND THE GTMEDIA RECEIVER IS MISSING THE AUTOROOM KEYS OF THE GOL TV HD CHANNELS that are on the satellite ses 6 band c gtmedia v8 uhd is not locating these keys but the EMM KEY PRO SAME MAKE THE AUTO ROOM SEE WHAT YOU COULD DO TO HELP US OK HUG.


freguencia 4060 R 30000 gol tv e vtv ok.

[JDavid22]

Is it possible to add powervu keys via softcam.key file on a GT Combo model with M.rs firm?

[STRETCH]

If you have Ma/rs software, to update keys on a (powervu) channel, you could try (Press PG-) then (Edit) as you wish.

Den

[JDavid22]

ok, then it would be channel by channel, for the case of an emmkey the procedure must be the same then or it could be imported from some softcam.key as for example the V9 prime. Thanks and Regards.

[cpr43]

Nope, PG- only works for Biss(1FFF). PV needs to enter working ECMs or EMM AU and wait till autorolls.

Read here how to enter keys until they fix to enter or dump the Softcam key file

viewtopic.php?f=55&t=33495&p=157320#p157320