Several issues about the fimware of the finder2/series

[xmh0511]

1. Relax the condition of determining whether the TP is duplicated.

In the current, if the polarity and symbol of two TPs are identical, then they will be confirmed as two duplicated TPs even though they are different in their frequency. For example: `11862/L/33756 ` and `11977/L/33756 ` are recognized as duplicated TPs in v8 finder2 firmware. However, they are different Tps, which can be found at https://www.lyngsat.com/BSAT-4A.html. We cannot input the second Tp if the first TP has existed. Relax the condition of whether two TPs are duplicated, that two Tps are duplicated only if their frequency, polarity, and symbol are identical.


2. Some particular LNB frequencies are missed in the firmware. We have some LNBs with non-regular LNB frequency, such as 10.678GHz, as shown in the picture

QQ20220627-0.jpg

Now, we cannot set an LNB frequency like 10678 in the v8 finder series.


Could you add an LNB frequency management page to let users free to input various LNB frequencies instead of just giving several common LNB frequencies?

[Tom.w]

thank you very much.
we will check them.

[drspastic]

i second this. i want to add manual local osc frequency because i am retuning lnb to get certain sats

[Dexter2903]

Tps de dados ocilando nos sats 63w 61w 58w 75w o 89 nem loca poderia resolver ?????(v8 finder 2)