GT MEDIA V7 pro bloccato dopo aggiornamento
Moderators: admin, GTMedia Team
GT MEDIA V7 pro bloccato dopo aggiornamento
Salve! a tutti ho fatto qualche manovra sbagliata durante l'aggiornamento !
il decoder si accende ma rimane bloccato su una schermata di test e non riesco a fare altro , vi allego una foto Grazie!
il decoder si accende ma rimane bloccato su una schermata di test e non riesco a fare altro , vi allego una foto Grazie!
- Attachments
-
- v7pro.jpg (2.66 MiB) Viewed 4166 times
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Grazie! ma ho gia provato questa procedura ma senza risolvere!
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
GTX Combo - V8 UHD - GT combo - V8 Finder Pro - V7 Pro - V8X - V8 Turbo - X8 - X8 combo - V8 Pro 2 - D2 DAB+
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
I see in your picture that your serial number is gone, xxxxxxx
There is this post on other boxes by Lining and note 4 at the bottom applies to your box.
You may need to contact GT Media / Lining with your serial number so they can make a recovery software version to recover your serial number.
Owen
There is this post on other boxes by Lining and note 4 at the bottom applies to your box.
You may need to contact GT Media / Lining with your serial number so they can make a recovery software version to recover your serial number.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
il cavetto c'è l'ho ma la procedura non funziona!Delirium wrote: ↑Fri Sep 02, 2022 5:00 pmEd allora devi fare quella hard, ma devi avere il cavo adatto
viewtopic.php?f=51&t=7535
percaso qualcuno sa che sigla ha la memoria flash US2,potrei provare con il programmatore di memorie!
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Mi rispondo da solo,fatta la prova con il programmatore universale, ma il decoder rimane sempre con la stessa schermata! boh adsesso mando una mail con il numero di serie vediamo se si riesce a fare qualcosaBilli73 wrote: ↑Sat Sep 03, 2022 9:31 amil cavetto c'è l'ho ma la procedura non funziona!Delirium wrote: ↑Fri Sep 02, 2022 5:00 pmEd allora devi fare quella hard, ma devi avere il cavo adatto
viewtopic.php?f=51&t=7535
percaso qualcuno sa che sigla ha la memoria flash US2,potrei provare con il programmatore di memorie!
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Non capisco come possa influire il numero di serie,e come sia possibile che dopo l'aggiornamento, fatto già altre volte sia successo questo .Feralkiwi wrote: ↑Fri Sep 02, 2022 9:11 pmI see in your picture that your serial number is gone, xxxxxxx
There is this post on other boxes by Lining and note 4 at the bottom applies to your box.
You may need to contact GT Media / Lining with your serial number so they can make a recovery software version to recover your serial number.
Owen
Il decoder comunque fa il boot e poi rimane con questa schermata come mai?
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Devi provare diverse versioni di firmware e rinominare una per una in flash.bin, verrà il momento in cui una funzionerà, con quattro tentativi di FW diverso di solito si ottiene
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Ok! Ma bisogna mettere su una chiavetta USB il file bin e poi richiamare lo stesso file con il programma dal PC?
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
OK! sono riuscito a far partire il programma, ora si connette con il decoder, ma rimane bloccato con una scritta "invalid boot" e non fa altro!
ho provato diverse versioni dalla 266 -275- 285-311 ma niente
ho provato diverse versioni dalla 266 -275- 285-311 ma niente
- Attachments
-
- freesat.jpg (3.17 MiB) Viewed 4048 times
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Ho cambiato chiavetta USB e ho completato il caricamento... Grazie!
Ma adesso ho un altro problema,il decoder funziona e si vede perfettamente per 1 Min poi si blocca l'immagine e anche se cambio canale rimane con la stessa immagine ...dopo spengo e accendo con il telecomando e riparte per poi bloccarsi di nuovo dopo 1 minuto esatto
Può essere un problema legato al numero di serie?
- Attachments
-
- 20220904_201230.jpg (2.94 MiB) Viewed 4029 times
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Potrebbe provenire dall'adattatore WiFi, controlla la sua temperatura
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Vi aggiorno la situazione! visto il difetto che faceva il decoder ho pensato di aggiornarlo via usb con una vecchia versione la 266, procedura andata a buon fine, ma quando il decoder si è riavviato e tornata la schermata del primo post e di nuovo punto e a capo!
Come posso risolvere?
@ lining ti allego la foto con il seriale
Come posso risolvere?
@ lining ti allego la foto con il seriale
- Attachments
-
- seriale.jpg (2.62 MiB) Viewed 3982 times
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
It does look like your unit has forgotten its serial number in its memory.Billi73 wrote: ↑Sun Sep 04, 2022 10:51 amNon capisco come possa influire il numero di serie,e come sia possibile che dopo l'aggiornamento, fatto già altre volte sia successo questo .Feralkiwi wrote: ↑Fri Sep 02, 2022 9:11 pmI see in your picture that your serial number is gone, xxxxxxx
There is this post on other boxes by Lining and note 4 at the bottom applies to your box.
You may need to contact GT Media / Lining with your serial number so they can make a recovery software version to recover your serial number.
Owen
Il decoder comunque fa il boot e poi rimane con questa schermata come mai?
Maybe some crash of the software over wrote that memory location.
Yes the fail after one minute does look like the serial number issue.
I will PM Lining as well with reference to this topic.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Your machine is currently in that state. You press the info button twice on the factory interface, and you will enter the upgrade interface. Take a look and I will contact you by private message.
FREESAT brand change GT MEDlA
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Provato a preme due volte info ma non succede nulla...
Come faccio a ripristinare il numero seriale?
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Have you checked your (pm's), Lining said he would contact you.
Den
Den
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
If you are seeing this picture, the factory interface, that is when you should press info twice as Lining asked.
I see also that there is a "Reset" button on that screen. Try moving to that button and click OK as well.
I may be that you need a software version from Lining to restore your serial number.
Owen
.
.
I see also that there is a "Reset" button on that screen. Try moving to that button and click OK as well.
I may be that you need a software version from Lining to restore your serial number.
Owen
.
.
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
1. You are in the factory interface, how to exit to the user interface?
2. Press blue and yellow 80 in the factory interface to upgrade the latest version or other versions.
FREESAT brand change GT MEDlA
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Ma che significa non va lo stesso.
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
Aiutooo! non c'è nessuno che mi può aiutare a sistemare il decoder? lo devo proprio buttare?
Re: GT MEDIA V7 pro bloccato dopo aggiornamento
I think Lining says to press blue and yellow and 80 to load new software
Owen2. Press blue and yellow 80 in the factory interface to upgrade the latest version or other versions.
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.