M.rs Softcam

[donjimmy4]

Hello, can you tell me how is the format to manually enter the PV, Biss and Tandberg keys in V8UHD M.rs, Thank you.

[cpr43]

Hello, can you tell me how is the format to manually enter the PV, Biss and Tandberg keys in V8UHD M.rs, Thank you.

Menu

Installation

Type 6666

key Edit

[donjimmy4]

Hello, can you tell me how is the format to manually enter the PV, Biss and Tandberg keys in V8UHD M.rs, Thank you.

Menu

Installation

Type 6666

key Edit

I mean how to write this example because there are more boxes to fill
B 0002 11884V 2A00E30D15D7B6A2;

[STRETCH]

Scan in the channel, then go to said channel as to view it, then with the remote press the (PG+/PG-), this should bring the (Key Edit) to the screen, then Press Green on the remote, put in the keys, then move the curser to (OK), Press OK, on the remote, then (Exit).
Hope this helps

Den

[GT_TR]

V8uhd , can do auto biss keys, powervu?

[cpr43]

V8uhd , can do auto biss keys, powervu?

Read important information here:

viewtopic.php?f=33&t=27717

[donjimmy4]

Hello, I need the PV keys for the 3923H and 3763H transponders of the 40.5° w Satellite, M.rs does not open them, thanks in advance

[cpr43]

Hello, I need the PV keys for the 3923H and 3763H transponders of the 40.5° w Satellite, M.rs does not open them, thanks in advance

If you previously loaded a Softcam file it could happens. Try deleting temporary your softcam (All keys) re boot and try the channels

[donjimmy4]

Hello, I need the PV keys for the 3923H and 3763H transponders of the 40.5° w Satellite, M.rs does not open them, thanks in advance

If you previously loaded a Softcam file it could happens. Try deleting temporary your softcam (All keys) re boot and try the channels

It only allows you to delete one at a time, it does not give the option to delete all, I could add the keys manually if you provide them to me

[cpr43]

Hello, I need the PV keys for the 3923H and 3763H transponders of the 40.5° w Satellite, M.rs does not open them, thanks in advance

If you previously loaded a Softcam file it could happens. Try deleting temporary your softcam (All keys) re boot and try the channels

It only allows you to delete one at a time, it does not give the option to delete all, I could add the keys manually if you provide them to me

Make DB backup, factory Reset or reload latest file again. Reload back DB. Connect to internet, Go to channel and wait

[donjimmy4]

Hello, I need the PV keys for the 3923H and 3763H transponders of the 40.5° w Satellite, M.rs does not open them, thanks in advance

If you previously loaded a Softcam file it could happens. Try deleting temporary your softcam (All keys) re boot and try the channels

It only allows you to delete one at a time, it does not give the option to delete all, I could add the keys manually if you provide them to me

Make DB backup, factory Reset or reload latest file again. Reload back DB. Connect to internet, Go to channel and wait

I did what you tell me but it still won't open those AMC transponders, it's best to get those keys and enter them manually.

[cpr43]

Hello, I need the PV keys for the 3923H and 3763H transponders of the 40.5° w Satellite, M.rs does not open them, thanks in advance

If you previously loaded a Softcam file it could happens. Try deleting temporary your softcam (All keys) re boot and try the channels

It only allows you to delete one at a time, it does not give the option to delete all, I could add the keys manually if you provide them to me

Make DB backup, factory Reset or reload latest file again. Reload back DB. Connect to internet, Go to channel and wait

I did what you tell me but it still won't open those AMC transponders, it's best to get those keys and enter them manually.

Ok I will send some EMM AU by PM

[Ivn101]

Can I please trouble someone to PM me a NA M.rs Softcam?

Thanks Folks.

[cpr43]

Can I please trouble someone to PM me a NA M.rs Softcam?

Thanks Folks.

Do you have flowers on it? Autoroll fix is in process. let the channels set and wait. Do not load SOFTCAM