Canales TDT+Satelite

[jpellas]

Cómo hacer que el Gtmedia V8 UHD reproduzca en la misma lista de canales los de TDT como los de satélite?

[Abanqueiro]

Ya usan la misma lista por defecto. Pueden tenerse intercalados incluso

[jpellas]

Ya usan la misma lista por defecto. Pueden tenerse intercalados incluso

No sabrás donde puedo conseguir una lista de TDT España y Astra para xxxx?

[Abanqueiro]

Las listas de canales que se comparten no suelen incluir canales TDT, por un motivo obvio, sólo valen para usuarios que usen el mismo repetidor TDT, vamos, cada provincia tiene uno distinto (generalizando, que hay más repetidores TDT que provincias)

[jpellas]

Las listas de canales que se comparten no suelen incluir canales TDT, por un motivo obvio, sólo valen para usuarios que usen el mismo repetidor TDT, vamos, cada provincia tiene uno distinto (generalizando, que hay más repetidores TDT que provincias)

Si, lo entiendo, el problema que tengo es, que cuando hago la búsqueda, o se ven las cadenas de satélite o se ven las de TDT, no se qué hago mal

[CAJE]

Tienes que pulsar en el mando a distancia la tecla SAT, selecciona ALL para poder tener las listas de SAT y TDT juntas

[STRETCH]

Just to confirm what (CAJE) is saying, when you press Sat on the remote, a list of satellites and the DVB-T comes to the screen, move the curser to what ever you require ie. 30w then Press OK, which will take you to the first channel on your list for that satellite. When you have finished viewing the satellite channel, Press SAT on the remote, move the curser to DVB-T, Press OK, again it will take you to the first channel of the list.
Hope this helps.

Den

[jpellas]

Just to confirm what (CAJE) is saying, when you press Sat on the remote, a list of satellites and the DVB-T comes to the screen, move the curser to what ever you require ie. 30w then Press OK, which will take you to the first channel on your list for that satellite. When you have finished viewing the satellite channel, Press SAT on the remote, move the curser to DVB-T, Press OK, again it will take you to the first channel of the list.
Hope this helps.

Den

Hola, gracias por responder, así lo hago y no se ven los canales de TDT, cuando hago la busqueda de TDT se ven las cadenas despues cuando cambio de lista a satelite o a todas las cadenas ya solo se ven cadenas de satelite, aunque despues seleccione TDT. hay señal pero pantalla negra.

Saludos.

[STRETCH]

Can we just confirm, what you are trying to do with the V8UHD receiver plus what software you have.
How is your dish set up, as a single dish or does it have a motor fitted.
1. Scan in the Abertis channels from the satellite at 30w.
2. Scan in your local TV channels which you get through your TV Aerial.
Then make each channel list the same.

Is there any way, that you can check the local TV channels, against the satellite channels to see how many are the same.

or are you looking towards Abertis channels and satellite channels from 19e through a line.
With more information, confirming how you wish to use the receiver, would be a great help.

Den

[jpellas]

Can we just confirm, what you are trying to do with the V8UHD receiver plus what software you have.
How is your dish set up, as a single dish or does it have a motor fitted.
1. Scan in the Abertis channels from the satellite at 30w.
2. Scan in your local TV channels which you get through your TV Aerial.
Then make each channel list the same.

Is there any way, that you can check the local TV channels, against the satellite channels to see how many are the same.

or are you looking towards Abertis channels and satellite channels from 19e through a line.
With more information, confirming how you wish to use the receiver, would be a great help.

Den

Software:
ec4m_V8UHD_v247_20230811
Escaneo Astra 19.2
Escaneo TDT España
Selecciono todos los canales.
Cuando hago la busqueda de TDT se ven todos los canales, está seleccionado TDT cuando cambio a todos los canales solo se ve satelite.

Gracias por tu respuesta STRETCH

[STRETCH]

I had switched my V8UHD over to M.rs software, so my post will not have helped.
I have got a V8 Turbo that does LOCAL TV and satellite, with old software, will have a look at this, to see if i can help.

So just to confirm, you are looking towards having LOCAL TV and Satellite from 19e, dish wish this would be a single one.

Hooked the V8 Turbo up to the local TV and the satellite cable, went to Menu / Installation / Found the DVB-T / Checked settings etc / Moved Curser to Auto Search / OK / at the end of search / OK.

Now for the Satellite, again Menu / Installation / DVB-S / OK / Satellite List should come to the screen, scroll to the satellite required / OK / Check that the settings are correct, LNB FREQ (Universal 9750 - 10600) / Exit, at this point you could carry out a Blind Scan or Scan from the Default List or add a new transponder.
The Menu's may almost be the same, at the end you should have two lists on your receiver DVB-T and DVB-S, did make a few changes to each list to see if this worked, which it did.

Den

[CAJE]

Can we just confirm, what you are trying to do with the V8UHD receiver plus what software you have.
How is your dish set up, as a single dish or does it have a motor fitted.
1. Scan in the Abertis channels from the satellite at 30w.
2. Scan in your local TV channels which you get through your TV Aerial.
Then make each channel list the same.

Is there any way, that you can check the local TV channels, against the satellite channels to see how many are the same.

or are you looking towards Abertis channels and satellite channels from 19e through a line.
With more information, confirming how you wish to use the receiver, would be a great help.

Den

Software:
ec4m_V8UHD_v247_20230811
Escaneo Astra 19.2
Escaneo TDT España
Selecciono todos los canales.
Cuando hago la busqueda de TDT se ven todos los canales, está seleccionado TDT cuando cambio a todos los canales solo se ve satelite.

Gracias por tu respuesta STRETCH

La TDT está al final

[jpellas]

Can we just confirm, what you are trying to do with the V8UHD receiver plus what software you have.
How is your dish set up, as a single dish or does it have a motor fitted.
1. Scan in the Abertis channels from the satellite at 30w.
2. Scan in your local TV channels which you get through your TV Aerial.
Then make each channel list the same.

Is there any way, that you can check the local TV channels, against the satellite channels to see how many are the same.

or are you looking towards Abertis channels and satellite channels from 19e through a line.
With more information, confirming how you wish to use the receiver, would be a great help.

Den

Software:
ec4m_V8UHD_v247_20230811
Escaneo Astra 19.2
Escaneo TDT España
Selecciono todos los canales.
Cuando hago la busqueda de TDT se ven todos los canales, está seleccionado TDT cuando cambio a todos los canales solo se ve satelite.

Gracias por tu respuesta STRETCH

La TDT está al final

Hola Caje, si, si salen los canales, pero no se ven.
Todo negro...

[STRETCH]

Can you show any photo's of the various stages of what you are doing, another set of eyes may spot something, to help you.

I have just noticed that the software that you have on your receiver is (ec4m V247 20230811), this could be the issue, the last software was V245.

Den

[vlacanlos]

Hola , tenía el mismo problema, activando en opciones , otros, el auto update Channel ,funciona el TDT después de estar viendo el SAT, le cuesta un poco pero va, un saludo.

[jpellas]

Hola, he hecho lo del auto update Channel y no va.
Después de hacer la búsqueda de TDT, solo veo los canales de TDT, no se ven los de satélite reinicio, y en la misma lista dónde están TDT y satélite, solo se ve satélite.
Gracias por la respuesta.

[jpellas]

Hola, he hecho lo del auto update Channel y no va.
Después de hacer la búsqueda de TDT, solo veo los canales de TDT, no se ven los de satélite reinicio, y en la misma lista dónde están TDT y satélite, solo se ve satélite.
Gracias por la respuesta.

Hola, por fin he conseguido una hacer funcionar la TDT y el Satelite de una manera funcional.
He realizado busqueda de canales en TDT y en Satelite.
He creado 2 listas aparte de la de todos los canales una la llamo satelite y otra TDT
Activando el auto update chanel, cuando cambias de una lista a otra, tarda un poco, y funcionan.

Saludos.

[STRETCH]

Glad to hear that you have now sorted, that is the way people have been saying, you make two lists.

Den