GT media G7PRO M.rs firmware

[paogius]

Salve, scusate la domanda che potrebbe sembrare banale. Su questo forum ufficiale i firmware del v7pro si fermano al 2022. Ho visto che su internet ci sono altri firmware chiamati "M.rs" sempre per v7pro. Potreste spiegarmi se sono ufficiali e cosa hanno di particolare rispetto a quelli che si scaricano nel forum?

[STRETCH]

It all depends on what you require from your receiver. With more details, users will be able to say which software will be best for your requirements.

Den

[paogius]

Hi, thanks for the answer. I don't mind about the graphical interface. I would like to understand if there are functional improvement in M.rs since the last release I can download from this forum has been released at the end of 2022.

[STRETCH]

As i have said, what channels to you view from what satellites with your receiver, any by what means.

Den

[paogius]

I view DTT italy channels and Hotbird 13e sat all channels free and not any language. I don't use TiVùSAT card, I use lines instead

[STRETCH]

With the software that you have now will still work for the channels you receive, you should be able to get other channels from the likes of 5w / 15w
27.5w / 30w.
If you do go over to M.rs software, there is no going back, (it takes a lot of effort, to go back, to the old software.)
With the M.rs software, you will be able to view the same channels as you can now, with the A F N channels at 9e they now Auto-roll, which means you do not have to look for keys every few hours, Biss / Powervu keys are updated and can be Downloaded onto the receiver over the air, plus any software updates, which you check through the (APPS) within the Menu.
There are still a lot of channels that can be viewed with this receiver, without going through (ec4m/ CCc.m) which costs money.
Hope this helps.

Den

[paogius]

With the software that you have now will still work for the channels you receive, you should be able to get other channels from the likes of 5w / 15w
27.5w / 30w.
If you do go over to M.rs software, there is no going back, (it takes a lot of effort, to go back, to the old software.)
With the M.rs software, you will be able to view the same channels as you can now, with the A F N channels at 9e they now Auto-roll, which means you do not have to look for keys every few hours, Biss / Powervu keys are updated and can be Downloaded onto the receiver over the air, plus any software updates, which you check through the (APPS) within the Menu.
There are still a lot of channels that can be viewed with this receiver, without going through (ec4m/ CCc.m) which costs money.
Hope this helps.

Den

Thanks for the info. Maybe I've not understood what do you mean when you say

"with the A F N channels at 9e they now Auto-roll, which means you do not have to look for keys every few hours, Biss / Powervu keys are updated and can be Downloaded onto the receiver over the air" usually I don't look for keys every few hours... is there some new mechanism to autosearch keys from network?

and

"There are still a lot of channels that can be viewed with this receiver, without going through (ec4m/ CCc.m) which costs money" means that is there a way to view same channels without CCc.m?

Another thing... once freshed the M.rs firmware via USB as it is done as the normal firmware, can it be updated with new version of M.rs always via USB or if a new version of M.rs is released it will become difficult to update the previous M.rs firmware like I want to go back to the old firmware?

Thanks in advance.

[STRETCH]

Lets take this one step at a time.
If you change your software to M.rs, which you will have to down load from another web site.
If you do put the M.rs software onto your receiver, and you do not like it, it is very hard to go back to the normal software.

1. With M.rs software, you can download the keys for most satellites, then update the receiver, this is a new mechanism to auto search keys from the internet, (GTMedia) server.

2. To view channels through (ec4m/CCc.m) which will be different from the ones that you can view with the softcam.

3. When you have put the M.rs software onto your receiver, using the USB, there is also a new mechanism to keep the receiver updated.
That is Menu / Apps / Move to Update / OK / If there is a UPDATE, it will show, plus if there is a update for the softcam.
The latest M.rs software for the V7 Pro is (V1.10.8736 13 NOV 2023)

Hope this helps

Den

[paogius]

Lets take this one step at a time.
If you change your software to M.rs, which you will have to down load from another web site.
If you do put the M.rs software onto your receiver, and you do not like it, it is very hard to go back to the normal software.

1. With M.rs software, you can download the keys for most satellites, then update the receiver, this is a new mechanism to auto search keys from the internet, (GTMedia) server.

2. To view channels through (ec4m/CCc.m) which will be different from the ones that you can view with the softcam.

3. When you have put the M.rs software onto your receiver, using the USB, there is also a new mechanism to keep the receiver updated.
That is Menu / Apps / Move to Update / OK / If there is a UPDATE, it will show, plus if there is a update for the softcam.
The latest M.rs software for the V7 Pro is (V1.10.8736 13 NOV 2023)

Hope this helps

Den

Thanks,
is there a tutorial for this?
"1. With M.rs software, you can download the keys for most satellites, then update the receiver, this is a new mechanism to auto search keys from the internet, (GTMedia) server."

[STRETCH]

No there is no tutorial for this.
Information is as follows, Make sure that your receiver is connected to the internet, Menu / APP / Update / OK.
What should come to the screen will be a Key update, which will look like this, 2024-01-20 KEY 2024-01-20 1900.08.
The curser should be on this, Press OK, will Download, Warning will come to the screen, Do you want to Update, say Yes, this will update
the receiver with the latest keys, then Exit out till picture comes to the screen.
To view this information on your computer, you can insert a USB into the receiver, Menu / Move to USB / OK / Yellow on Remote / Upload Keys to USB.
Remove USB, then Exit out.
If you wish to put these keys into another GTMedia receiver change the file to read (SOFTCAM), then insert into the receiver.

Hope this helps

Den

[Billie34]

Lets take this one step at a time.
If you change your software to M.rs, which you will have to down load from another web site.
If you do put the M.rs software onto your receiver, and you do not like it, it is very hard to go back to the normal software.

1. With M.rs software, you can download the keys for most satellites, then update the receiver, this is a new mechanism to auto search keys from the internet, (GTMedia) server.

2. To view channels through (ec4m/CCc.m) which will be different from the ones that you can view with the softcam.

3. When you have put the M.rs software onto your receiver, using the USB, there is also a new mechanism to keep the receiver updated.
That is Menu / Apps / Move to Update / OK / If there is a UPDATE, it will show, plus if there is a update for the softcam.
The latest M.rs software for the V7 Pro is (V1.10.8736 13 NOV 2023)
Hope this helps

Den

Thanks,
is there a tutorial for this?
"1. With M.rs software, you can download the keys for most satellites, then update the receiver, this is a new mechanism to auto search keys from the internet, (GTMedia) server."

I'm also looking for instructions for this

[STRETCH]

Have tried this with few receivers that have M.rs software, at this time the system does not work.

Den

[resca]

My V8X worked fine with M.rs for several months. Non it starts to loose channels: 2 weeks ago it lost TV8, this week it lost RAI3: the EPG works for them as well as the info, but the video/audio don't show. It says Encrypted Channel. Re-scanning doesn't solve the problem. Menu -> Apps -> Firmware Update -> Load From Cloud shows nothing. The present firmware is V1.10.8703. The connection to Internet works: It successfully connect to something like a VPN and several unknown (for me) addresses. Almost all the - once working - interactive apps, for instance weather, don't work.
Any suggestions?