feed astra 19 se escucha pero no se ve...

[futbolerosat]

he buscado un feed de astra con symbol rate 7200. Me lo ha cogido el deco, se escucha pero no se ve. Puede ser porque el feed sea 4:2:2 y el receptor v9 prime no los abre? se escucha pero pone canal encriptado. Un saludo

[futbolerosat]

creo que es un partido de futbol alemán pero no se ve.

[futbolerosat]

es bueno saber que el deco pilla feeds con symbol rate tan bajo. Pero no se ve

[Feralkiwi]

Have a look at the old posts made by Freefall
viewtopic.php?f=45&t=28800&p=153176#p153176

You may find a report there for that same feed.
also sites like lyngsat dot com show some feeds.

Owen

[STRETCH]

Most feeds will be found with a GTMedia receiver can be viewed, but if your feed is a 4.2.2, the GT Combo will be the only receiver that should
be able to decode, but with original software.

Den

[futbolerosat]

thanks a lot

[Feralkiwi]

Was that feed scrambled?
Did the unit "autobiss" and return a code?
Was there a "Scrambled" banner across the screen?

Some BISS feeds have the sound FTA while video is scrambled.

Another thing that happens is the current feed has VPID of 1165 and the channel you found with signal on your list has a VPID of 200.
The set top box will not show the video if the channel you are on has an incorrect VPID.
To check this scan the TP and watch what the channel is called and find that one in your satellite's channel list, not an older channel of the same frequency.

If it was a BISS channel that did roll the code and still showed no video, yes it could be 4:2:2.
If it was BISS and did not roll, then it is BISS with FTA sound and should have showed "Scrambled" across the screen.
Some feeds now only include the CW, that is used to find the BISS code, at the very start of the feed, so if you look at that feed later, there is no CW and it will not roll the code.

Owen