Ricerca pid M.rs firmware

[gigano]

Buongiorno, è possibile fare la ricerca manuale PID con V9prime M.rs firmware? Grazie.

[CAJE]

No, the PID is used internally to identify the channel components.

[gigano]

Come posso trovare questo canale "Megogo Sport" su Astra 4A 4,8 E in ricerca automatica non lo trova.

[kladovchk]

gigano, Puoi provare a trovare il canale in questo modo.

[CAJE]

Come posso trovare questo canale "Megogo Sport" su Astra 4A 4,8 E in ricerca automatica non lo trova.

11747 V 30000

[kladovchk]

Come posso trovare questo canale "Megogo Sport" su Astra 4A 4,8 E in ricerca automatica non lo trova.

11747 V 30000

Sì

[gigano]

Salve kladovchk ho fatto esattamente come da te descritto ma niente da fare ma "Megogo" non entra.

[STRETCH]

Carried out a scan of the said transponder, the said channel does scan in.

Den

[gigano]

Ho fatto la ricerca del transponder tutti i canali ma il canale TV Megogo non entra.

[cpr43]

If you know PID for the channels. Hit SUB on your remote.

Menu
Installation
Right Arrow- Transponder (Hit OK)
While on channel to search TP hit SUB on remote
The Edit PID screen will pop up
Hit the Red Button for ADD
Fill Channel Name-Channel type and all PID information and SAVE (Yellow Button)

Now the channel is on your Channel List

[kladovchk]

Menu
Installation
Right Arrow- Transponder (Hit OK)
While on channel to search TP hit SUB on remote
The Edit PID screen will pop up
Hit the Red Button for ADD
Fill Channel Name-Channel type and all PID information and SAVE (Yellow Button)

Now the channel is on your Channel List

[cpr43]

As explained in my details

[STRETCH]

As (kladovchk & myself) have said in past posts, you are able to scan the channel (Megogo Sport) on the said transponder, make sure that your scan mode is (All Channels), then Delete the channels that you do not require.

Den

[kladovchk]

As explained in my details

Yes, I showed it in the screenshots.

[kladovchk]

Come posso trovare questo canale "Megogo Sport" su Astra 4A 4,8 E in ricerca automatica non lo trova.

Forse l'antenna non è sintonizzata su questo satellite e quindi questo canale non è registrato su questo transponder? Su questo satellite ci sono altri canali oltre a "Megogo Sport". Sono prescritti per te? Mostra uno screenshot.

[gigano]

As (kladovchk & myself) have said in past posts, you are able to scan the channel (Megogo Sport) on the said transponder, make sure that your scan mode is (All Channels), then Delete the channels that you do not require.

Den

"Tutti i canali" già fatto niente da fare.

11746V SR: 30000 2/3
1) ERC
2) English Club
3) DSNS Informed
4) DSNS Informed
5) DSNS Informed
6) DSNS Informed
7) DSNS Informed
8) DSNS Informed
9) DSNS Informed
10) DSNS Informed
11) DSNS Informed
12) DSNS Informed
13) DSNS Informed
14) DSNS Informed

[gigano]

Menu
Installation
Right Arrow- Transponder (Hit OK)
While on channel to search TP hit SUB on remote
The Edit PID screen will pop up
Hit the Red Button for ADD
Fill Channel Name-Channel type and all PID information and SAVE (Yellow Button)

Now the channel is on your Channel List

Hi kladovchk ho fatto tutto come hai descritto niente da fare non funziona.

[STRETCH]

Have noticed that you have got the transponder details as 11746v 30000 2/3, with 14 channels.
Carried out the following with the V8X, deleted the said transponder, which would have removed all channels from that transponder, reinput the transponder details, 11747v 30000 Auto, moved the curser up to (Start Search) set that to (TP Search), moved the curser up to (Scan Mode) set that to (All Channels),then Pressed OK to start search, found 26 channels, the fifth one is the one that you require.
My signal readings are as follows S92% / Q74% with a 100cm dish here in the UK.

Den

[Feralkiwi]

Have noticed that you have got the transponder details as 11746v 30000 2/3, with 14 channels.
Carried out the following with the V8X, deleted the said transponder, which would have removed all channels from that transponder, reinput the transponder details, 11747v 30000 Auto, moved the curser up to (Start Search) set that to (TP Search), moved the curser up to (Scan Mode) set that to (All Channels),then Pressed OK to start search, found 26 channels, the fifth one is the one that you require.
My signal readings are as follows S92% / Q74% with a 100cm dish here in the UK.

Den

I found I also needed to delete first and then scan.
This with a single sports feed 12619v7500 (not T2Mi).
Funcam (m a r s version on v8 Ultra) software would not update the new channel details like name and I think vpid.
It would not auto biss due to incorrect details.
Was a feed from the same provider, so maybe not updated based on TP frequency and provider only.

Owen

[Feralkiwi]

Have noticed that you have got the transponder details as 11746v 30000 2/3, with 14 channels.
Carried out the following with the V8X, deleted the said transponder, which would have removed all channels from that transponder, reinput the transponder details, 11747v 30000 Auto, moved the curser up to (Start Search) set that to (TP Search), moved the curser up to (Scan Mode) set that to (All Channels),then Pressed OK to start search, found 26 channels, the fifth one is the one that you require.
My signal readings are as follows S92% / Q74% with a 100cm dish here in the UK.

Den

I found I also needed to delete first and then scan.
This with a single sports feed 12619v7500 (not T2Mi).
Funcam (m a r s version on v8 Ultra) software would not update the new channel details like name and I think vpid.
It would not auto biss due to incorrect details.
Was a feed from the same provider, so maybe not updated based on TP frequency and provider only.

Owen

Also there is a menu option.
Settings / System Settings / Channel Name Auto Update / on / off.
I had this off.

Does the T2MI TP correct and Auto Update to all the channels if this is on?

Owen

[gigano]

HO fatto esattamente quello che mi avete suggerito di fare ma niente "Megogo" non entra, ricevo solo i soliti 14 canali.

[kladovchk]

HO fatto esattamente quello che mi avete suggerito di fare ma niente "Megogo" non entra, ricevo solo i soliti 14 canali.

E quale versione del Software hai installato? L'ultimo ad oggi è M.rs V9 Primes_V1 .11. 18368. Tutti i canali dovrebbero essere registrati su questo software. Forse hai un vecchio software quindi non riesci a trovare questo canale. Probabilmente troverai il software da solo.

PS.

Due software M.rs V9 Primes sono stati rilasciati su M.rs V9 Primes_V1.11.18368_12082025 e M.rs V9 Primes_V1.11. 18368_14082025. C'è qualcosa a che fare con il telecomando. Leggere la descrizione prima dell'installazione. Non ho questo prefisso, non posso dirlo con certezza.

[STRETCH]

The user may have to purchase a V8X receiver, to get the channel that he requires.

Den

[gigano]

Hi, my firmware is: M.rs V9 Prime
H7W Version: V1.0.1
S/W Version: V1.11.12645

[gigano]

Grazie kladovchk il problema era firmware, un grazie anche a STRECH, CAJE, cpr43 e Feralkiwi un grazie a tutti voi per il vostro aiuto.