New Firmware M.rs in arrivo
Moderators: admin, GTMedia Team
-
- Posts: 5
- Joined: Tue Jun 09, 2020 7:48 am
Re: New Firmware M.rs in arrivo
per inserire i codici su xtream mi confermate che all'interno del file .cfg la stringa deve essere in questo modo?
X: url porta username password
grazie
La luce sul cielo di cui si parlava prima è con xtream o semplice CCc.m?
Grazie ancora in anticipo a tutti
X: url porta username password
grazie
La luce sul cielo di cui si parlava prima è con xtream o semplice CCc.m?
Grazie ancora in anticipo a tutti
-
- Posts: 9
- Joined: Tue Aug 03, 2021 8:59 pm
Re: New Firmware M.rs in arrivo
Ormai a me quasi tutto buio, bisogna aggiornare i settings oppure è tutto inutile?
-
- Posts: 4166
- Joined: Mon Jan 09, 2017 2:31 pm
- Location: West Midlands UK
Re: New Firmware M.rs in arrivo
Check out the (facebook) page.
Den
Den
-
- Posts: 81
- Joined: Thu Nov 23, 2023 8:22 am
Re: New Firmware M.rs in arrivo
Aggiornamento firmware al 12 agosto , quello di Luglio è diventato vecchio
-
- Posts: 9
- Joined: Tue Aug 03, 2021 8:59 pm
Re: New Firmware M.rs in arrivo
14 agosto
Posso fare direttamente questo?
Posso fare direttamente questo?
-
- Posts: 4166
- Joined: Mon Jan 09, 2017 2:31 pm
- Location: West Midlands UK
Re: New Firmware M.rs in arrivo
Try, Menu / APP / OK / Update , make sure you are connected to the internet.
Den
Den
-
- Posts: 2
- Joined: Mon Sep 15, 2025 7:03 pm
PROBLEMA GT MEDIA V8UHD
please i need your help. Second GT MEDIA V8UHD completely blocked after few seconds from booting.... No way to unlock it.
The first problem was the block with lan cable connected, it didn't turn on. Cable disconnected and then it turned on but today completely blocked...... Some recovery options??
With LAN cable connected it doesn't start. With LAN disconnected it starts but stops after few seconds
It remains blocked at this point and i can't have the time to enter in the settings menu and do a reset or reinstall the firmware.
How to solve?
The first problem was the block with lan cable connected, it didn't turn on. Cable disconnected and then it turned on but today completely blocked...... Some recovery options??
With LAN cable connected it doesn't start. With LAN disconnected it starts but stops after few seconds
It remains blocked at this point and i can't have the time to enter in the settings menu and do a reset or reinstall the firmware.
How to solve?
- CAJE
- 网站管理员
- Posts: 3020
- Joined: Sun Dec 06, 2020 8:00 pm
Re: New Firmware M.rs in arrivo
Try UPg with the firmware renamed to update.bin
-
- Posts: 2
- Joined: Mon Sep 15, 2025 7:03 pm
Re: New Firmware M.rs in arrivo
How? Can't enter in settings menu.....
- CAJE
- 网站管理员
- Posts: 3020
- Joined: Sun Dec 06, 2020 8:00 pm
Re: New Firmware M.rs in arrivo
You must do it via USB and press the Power key on the remote when the word boot appears on the display.
-
- Posts: 4166
- Joined: Mon Jan 09, 2017 2:31 pm
- Location: West Midlands UK
Re: New Firmware M.rs in arrivo
It would have been better to start another thread, with the issue that you have.
With the photo supplied, is that what comes up after the receiver has booted.
Do you know what software you have on your receiver, what you may have to do is load the latest software to USB, then rename as (update.bin).
Can you supply more photo's going through the various stages.
Den
With the photo supplied, is that what comes up after the receiver has booted.
Do you know what software you have on your receiver, what you may have to do is load the latest software to USB, then rename as (update.bin).
Can you supply more photo's going through the various stages.
Den
Who is online
Users browsing this forum: All compatible Bots and 0 guests