GTC biss problem
Moderators: admin, nzl229, GTMedia Team
GTC biss problem
hi
how to make the gtc open the 65w channels, when placing the biss keys they do not work, black screen
thanks
how to make the gtc open the 65w channels, when placing the biss keys they do not work, black screen
thanks
Re: GTC biss problem
If is a working biss channel in other box? Can you post how you are writing the key in softcam??
Re: GTC biss problem
- Attachments
-
- WhatsApp Image 2019-05-15 at 9.08.43 PM.jpeg (46.47 KiB) Viewed 3014 times
Re: GTC biss problem
Add the same lines 00 and 01 and test. have you updated OSCAM. Any idea what Oscam version you are??
00011FFF 00 00000000000101 ; NASA
00011FFF 01 00000000000101 ; NASA
00011FFF 00 00000000000101 ; NASA
00011FFF 01 00000000000101 ; NASA
Re: GTC biss problem
You must put satellite orbit like (45.0W)
Re: GTC biss problem
00011FFF 00 00000000000101 ; NASA ,(45.0W)
00011FFF 01 00000000000101 ; NASA ,(45.0W)
00011FFF 01 00000000000101 ; NASA ,(45.0W)
Re: GTC biss problem
Anything after the semicolon is comment... and remember OSCAM requires you to use a Transponder ID and also the SID of the channel, also the designated letter at the beginning of the line for Biss (BISS=F). I have never tried a Biss channel on my GTC so I'm also in the dark.
PD explained here
Code: Select all
https://github.com/oscam-emu/oscam-patched/wiki/BISS1-and-BISS2-mode-1-config
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: GTC biss problem
00 and 01 are no longer needed if using latest 518 Oscam.
F 00061FFF 00000000 XXXXXXXXXXXXXXXX ;Channel Name (sat loc) (Channel Name / Sat Loc is optional)
F 00061FFF 00000000 XXXXXXXXXXXXXXXX ;Channel Name (sat loc) (Channel Name / Sat Loc is optional)
Re: GTC biss problem
Ok this works... I just scanned in some Biss tps and by trial and error I got this to work, you need the SID and the VPID and the channel code.
FORMAT. F SSSSVVVV 00000000 1122334455667788 ;
where SSSS= SID of channel, 4 Hex digits eg 0001
VVVV= VPID of channel, 4 Hex digits eg 0134
this is what the entry in softcam.key looks like:
;
;117w 3968-V-7500
F 00010134 00000000 AE13xxxx89C881D2 ;
F 00020135 00000000 5DDC84BDBAF0xxxx ;
;
;
There may be other ways but this is confirmed working. On the channel information page of the GTC the SID Hex is the one in brackets, the Video pid is shown in Decimal, so needs to be converted to Hex
FORMAT. F SSSSVVVV 00000000 1122334455667788 ;
where SSSS= SID of channel, 4 Hex digits eg 0001
VVVV= VPID of channel, 4 Hex digits eg 0134
this is what the entry in softcam.key looks like:
;
;117w 3968-V-7500
F 00010134 00000000 AE13xxxx89C881D2 ;
F 00020135 00000000 5DDC84BDBAF0xxxx ;
;
;
There may be other ways but this is confirmed working. On the channel information page of the GTC the SID Hex is the one in brackets, the Video pid is shown in Decimal, so needs to be converted to Hex
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: GTC biss problem
Exactly! If the sid is not repeat in the OScam you can sustitute VPID with 1FFF. If the sid is repeat in the softcam then you can use the VPID.juan_vale wrote: ↑Thu May 30, 2019 7:48 pmOk this works... I just scanned in some Biss tps and by trial and error I got this to work, you need the SID and the VPID and the channel code.
FORMAT. F SSSSVVVV 00000000 1122334455667788 ;
where SSSS= SID of channel, 4 Hex digits eg 0001
VVVV= VPID of channel, 4 Hex digits eg 0134
this is what the entry in softcam.key looks like:
;
;117w 3968-V-7500
F 00010134 00000000 AE13xxxx89C881D2 ;
F 00020135 00000000 5DDC84BDBAF0xxxx ;
;
;
There may be other ways but this is confirmed working. On the channel information page of the GTC the SID Hex is the one in brackets, the Video pid is shown in Decimal, so needs to be converted to Hex
I have found that what the manual entry Softcam Setting show is different than the Softcam file you load using Webif
http://192.168.0.xx:8081/files.html?file=SoftCam.Key
Re: GTC biss problem
Yes, as SID 0001 and low order SIDs are common it almost makes it obligatory to use the VPID. According to the GitHub I posted we can use the VPID or the APID or the PMT.... so will have to try those as well. I just did another transponder on 117w and works well.cpr43 wrote: ↑Thu May 30, 2019 9:01 pm
Exactly! If the sid is not repeat in the OScam you can sustitute VPID with 1FFF. If the sid is repeat in the softcam then you can use the VPID.
I have found that what the manual entry Softcam Setting show is different than the Softcam file you load using Webif
http://192.168.0.xx:8081/files.html?file=SoftCam.Key
No live links (Rule #18) highlight the URL and use the Code tag option "</>"
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
V7HD, V8SUPER, V8X, V7PRO, GTC, FORMULER F4(TURBO)
Re: GTC biss problem
How to upload biss key, powervu key manually?
GTC Android Hybrid Box support biss/powervu autoroll ?
GTC Android Hybrid Box support biss/powervu autoroll ?
Abdallah
GTMedia GTC Android Hybrid Box
GTMedia V7HD
GTMedia V7S HD
StarSat 9990HD,
Echolink 7777HD
StarSat TSR 175
Index mpeg2 box
GTMedia GTC Android Hybrid Box
GTMedia V7HD
GTMedia V7S HD
StarSat 9990HD,
Echolink 7777HD
StarSat TSR 175
Index mpeg2 box
Re: GTC biss problem
Go to DVB sat area
After scanning your sats
Menu
Installation
Type 6666 on your remote Control
CS protocol menu will activate
Enter CS Protocol
Enter Softcam Setting
Add (red Boton)
Choose Biss or Power Vu and enter the keys
Finally Yes for Save