I am trying to scan 33. East on meter finder and it gives fail . Signal is there but on multistream frequency 12597 v 10058 got freezed and will be restart after awhile.
Note: multistream frequency 12646 doesn't show signal on it. Working perfect on my Android TV box
Is it software issue or hardware.
Appreciate your help
Satfinder Meter restart issue
Moderators: admin, GTMedia Team
-
Feralkiwi
- 网站管理员
- Posts: 9097
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: Satfinder Meter restart issue
Try entering the frequency and SR in to the TP menu and scan from there.
Owen
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
John1
- Posts: 70
- Joined: Thu Mar 28, 2019 8:23 pm
-
Feralkiwi
- 网站管理员
- Posts: 9097
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: Satfinder Meter restart issue
Many models do this.
I think it is that some data for that satellite / TP matches the code for the "end of file" for the user data inside the unit.
Freesat have made changes to correct this before.
I found that if the satellite was already scanned in the file, it does not get stuck.
It is when the unit tries to add this new TP that it gets stuck.
If you can load a user file that already has that TP / channels it should work.
It may also be something with these newer multistream formats.
I have heard that Freesat units do not work with the new ABC multistream TP on Optus D1@160e.
They do work with the multi stream on Intelsat19@166e.
Owen
I think it is that some data for that satellite / TP matches the code for the "end of file" for the user data inside the unit.
Freesat have made changes to correct this before.
I found that if the satellite was already scanned in the file, it does not get stuck.
It is when the unit tries to add this new TP that it gets stuck.
If you can load a user file that already has that TP / channels it should work.
It may also be something with these newer multistream formats.
I have heard that Freesat units do not work with the new ABC multistream TP on Optus D1@160e.
They do work with the multi stream on Intelsat19@166e.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
John1
- Posts: 70
- Joined: Thu Mar 28, 2019 8:23 pm
Re: Satfinder Meter restart issue
I don’t have user file containing Eutelsat@33.eastFeralkiwi wrote: ↑Wed Mar 04, 2020 7:27 pmMany models do this.
I think it is that some data for that satellite / TP matches the code for the "end of file" for the user data inside the unit.
Freesat have made changes to correct this before.
I found that if the satellite was already scanned in the file, it does not get stuck.
It is when the unit tries to add this new TP that it gets stuck.
If you can load a user file that already has that TP / channels it should work.
It may also be something with these newer multistream formats.
I have heard that Freesat units do not work with the new ABC multistream TP on Optus D1@160e.
They do work with the multi stream on Intelsat19@166e.
Owen