Anyone have idea why for the past coupe of months (since Covid started) none of my internet connected boxes will auto decode Biss channels?
Box says please wait, and after a lot of waiting nothing happens?
I am after the ABC feeds in particular if someone could help?
Tony
Biss Auto roll
Moderators: admin, GTMedia Team
-
- Posts: 1289
- Joined: Thu Aug 11, 2016 2:55 pm
Re: Biss Auto roll
What satellite, what TP, orbit location please.ftass wrote: ↑Fri Jun 26, 2020 12:47 pmAnyone have idea why for the past coupe of months (since Covid started) none of my internet connected boxes will auto decode Biss channels?
Box says please wait, and after a lot of waiting nothing happens?
I am after the ABC feeds in particular if someone could help?
Tony
-
- Posts: 16
- Joined: Mon May 20, 2019 8:18 am
Re: Biss Auto roll
Thank you for your message!
Optus D2 ABC Feeds and Asiasat 5 feeds.
Kind regards,
Tony
Optus D2 ABC Feeds and Asiasat 5 feeds.
Kind regards,
Tony
-
- 网站管理员
- Posts: 7260
- Joined: Thu Aug 11, 2016 1:41 pm
Re: Biss Auto roll
There is only 1 GTMedia box Auto Biss here the V8X and was just released.ftass wrote: ↑Fri Jun 26, 2020 12:47 pmAnyone have idea why for the past coupe of months (since Covid started) none of my internet connected boxes will auto decode Biss channels?
Box says please wait, and after a lot of waiting nothing happens?
I am after the ABC feeds in particular if someone could help?
Tony
-
- 网站管理员
- Posts: 9097
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: Biss Auto roll
Sadly I do not see the ABC TP as it is Auzzy only, not Auzzy / NZ.
Are they temp feeds up for a short time, or constant channel?
I am hoping to set up an Asiasat5 dish for feeds.
I see that sat at 4.2 degrees above the horizon.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 16
- Joined: Mon May 20, 2019 8:18 am
Re: Biss Auto roll
ABC feeds are constant, so they may not have to be repeating the key on air possibly. 4.2 degrees is low! Watch out for earth noise!
-
- 网站管理员
- Posts: 9097
- Joined: Fri Aug 12, 2016 6:51 am
- Location: New Zealand
Re: Biss Auto roll
I just clear the 220kV transmission lines 500m away across clear fields. Works well,
I had a dish on it before the mover actuator stripped.
Owen
Dishes; 3x3m, 2.4m and 4.1m, 10+ ku, 2 movers, USARLS. V8 Combo, Pro, V8 Golden, Nova V8Pro2, GTC, Super.V7HDs, Combo and V7s V7Plus Finder, Finder-Meter V8X / UHD V7Pro GT/XCombo. Sats 100.5E to 177W. I'm a Sat hobbyist who helps out.
-
- Posts: 1
- Joined: Sun Sep 12, 2021 1:03 pm
Re: Biss Auto roll
Me too experiencing the same issue.
Biss key didn’t Auto rolled when I wanted to see the cricket feed on Intelsat 7/10 @68.5.
3855H/6666.
Do i have to take any additional steps?
Biss key didn’t Auto rolled when I wanted to see the cricket feed on Intelsat 7/10 @68.5.
3855H/6666.
Do i have to take any additional steps?
-
- 网站管理员
- Posts: 7260
- Joined: Thu Aug 11, 2016 1:41 pm